The industry defacto standard for high quality semi-automated profiling for all devices in your workflow - monitor, scanner, printer, spot color measurement, plus ambient and flash light measurements - one device does it all! In addition to ProfileMaker 5 Platinum software, the i1Pro bundle includes an i1Pro device in your choice of NoFilter or UVcut.
ProfileMaker 5 Platinum i1Pro Bundle
Part # EOBA/PM5PL MSRP $ 2499.00 USD Add to cart
ProfileMaker 5 Platinum i1Pro UVcut Bundle
Part # EOBAUV/PM5PL MSRP $ 2499.00 USD Add to cart
The ProfileMaker 5 Platinum i1 Pro Bundle includes:
ProfileMaker Platinum Software features modules to manage all of your color imaging devices and processes.
- Monitor Module – Calibrate and create ICC profiles for CRT, LCD and laptop displays, plus match multiple monitors to a reference monitor.
- Printer Module – Create ICC profiles for RGB and CMYK output devices.
- MultiColor Output Module – Create profiles for MultiColor devices featuring CMYK plus up to 6 additional channels including Hexachrome®. Includes the ability to set ink priorities, minimize ink consumption and minimize metamerism for two different illuminants. Includes Photoshop® Plug-Ins for soft/hard proofing and multicolor separations.
- Digital Camera Module – Create ICC profiles for digital cameras.
- Scanner Module – Create ICC profiles for flatbed or drum scanners.
- MeasureTool Module – Collect, analyze and average data from color measurement devices for accurate profile computation. Create your own custom test charts to achieve the most accurate output profiles. Evaluate density, dot gain, gradation curves and color for complete process control.
- Editor Module – Globally or selectively edit profiles or fine-tune the ones you’ve created by working with lightness, contrast, saturation, white point or gradation curves. Check spot color reproducibility and view gamuts in 2D or 3D.
- ColorPicker Module – Convert spot colors (CxF or Pantone) to process colors, individually or as a complete library. Limit the maximum number of device channels and define the minimum ink coverage for higher process stability.
i1Pro Spectrophotometer
- Industry-standard spectrophotometer for both emissive (monitor) and reflective (print) profiling, plus spot measurement
Ambient light measurement head.
- Monitor holder
- Soft carrying case
- USB powered, so extra power cable is not required.
- Available in either NoFilter or UVcut. Purchase according to your workflow requirements.
ProfileMaker™ 5 Platinum Software
System Requirements Apple Macintosh®
• Power Macintosh® G4 or G5
• Mac OS X 10.3 or higher
• 128 MB of available RAM
• 300 MB of available hard-disk space for full program installation
• 17" or larger color monitor, resolution 1024 x 768 pixels is recommended
• 24-bit video card
• Internet Explorer 4.0 or later or Safari
System Requirements Windows®
• Pentium® II or faster processor
• Vista®, Windows® 2000, XP, 2003 Server
• 128 MB of available RAM
• 300 MB of available hard-disk space for full program installation
• 17" or larger color monitor, resolution 1024 x 768 pixels is recommended
• 24-bit video card
• Internet Explorer 4.0
Supported Devices for Monitor Profiling
• i1Pro (all Revs)
• i1Display (V1 & V2)
• Spectrolino
• Chroma 4 (Macintosh only)
• Monitor Optimizer Serial & USB
• DTP 92 USB
Supported Devices for Output Profiling
• i1Pro (all Revs)
• i1iO
• i1iSis
• SpectroEye
• X-Rite 528, 530, 938
• ColorEye XTH
• Spectrolino
• Spectrolino/SpectroScan (T)
• iCColor
• SPM Series
• Vipdens 2000
• Digital Swatchbook
• DTP41/B(T), 51
• SpectroMat
Supported languages
English, French, German, Spanish, and Italian
i1 Pro Spectrophotometer
Measurement modes:
Reflectance single measurement
Reflectance scanning measurement with automatic patch detection
Emission: radiance measurement (monitor measurement)
Emission: irradiance measurement (light measurement)
Spectral analyzer: Holographic diffraction grating with 128 pixel diode array
Optical resolution: 10nm
Physical sampling interval: 3.5nm
Spectral data: Range: 380 ... 730 nm in 10nm steps
Measurement aperture: 4.5mm diameter
Interface: USB 1.1
Physical dimensions: Length 151mm, width 66mm, height 67mm (6 x 2.6 x 2.6 inches)
Weight: 185g (6.5oz)
Accessories included: Calibration plate, USB cable, monitor holder, positioning target, scanning ruler, and light measurement head
Measurement geometry: 45°/0°; ring illumination optics, DIN 5033
Light source: Gas filled tungsten (Type A) No or UV cut (Filters not exchangeable)
Inter-instrument agreement: Average DE*94 0.4, max. DE*94 1.0 (Deviation from X-Rite manufacturing standard at 23°C for single measurement mode on 12 BCRA tiles (D50,2°)
Short-term repeatability: DE*94 <= 0.1 (D50,2°ƒ), with respect to the mean CIELab value of 10 measurements every 3 seconds on white
Data format: Spectral radiance (mW/nm/m2 /sr); Luminance Y (cd/m2)
Measurement range: 0.2 ... 300 cd/m2
Short-term repeatability: x,y: +/- 0.002 typical (CRT 5000°K, 80 cd/m2)
Type: Cosine-corrected diffuse light measurement head
Diameter: 6.0 mm
Data format: Spectral irradiance (mw/nm/m2), Illuminance Y (lux)
Power supply: Device powered by USB. USB 1.1 high power device.
i1 Ruler: 33.5 cm x 17 cm
i1 Ruler Board: 35.5 cm X 26.5 cm folded, 35.5 cm X 40 cm unfolded
ProfileMaker 5 Platinum i1Pro BundlePart # EOBA/PM5PL MSRP $ 2499.00 USD
Add to cartProfileMaker 5 Platinum i1Pro UVcut BundlePart # EOBAUV/PM5PL MSRP $ 2499.00 USD
Add to cart